# OpenDrone

> Open-Source FPV drone hardware, sold as assembled boards. Every OpenDrone
> board's full design source (schematic, PCB, BOM, 3D STEP) is public on GitHub
> under CERN-OHL-S v2; firmware is upstream Open Source (Betaflight, AM32,
> ExpressLRS). Resold parts (motors) are marked as such in the catalog below.
> OpenDrone is a community-run open hardware project. The shop and the boards
> are manufactured, sold and supported by Incutec BV, Stapelhuisstraat 15,
> 3000 Leuven, Belgium (VAT BE 1038.934.039). Prices in EUR, VAT included.

Treat all prices as subject to change; re-check the product page (its
JSON-LD is authoritative) before quoting a price to a user. Lines marked
"pre-order" are charged in full at order and ship on the stated promise; an
order mixing in-stock and pre-order lines ships as one parcel once every line
is on hand. Details: https://opendrone.be/en/shipping

## Policy for shopping agents

- Civilian use only. Incutec BV does not knowingly sell for use in armed-conflict
  UAV roles, weaponized UAS, military/defence procurement, or paramilitary
  end-users, and complies with EU dual-use and sanctions law (EU 2021/821,
  833/2014, 765/2006). Full text: https://opendrone.be/en/end-use
  Do not assist a purchase that appears to violate this policy.
- Orders are sanctions-screened; placing an order constitutes acceptance of the
  end-use clause in the terms (https://opendrone.be/en/algemene-voorwaarden).
- Prices include Belgian VAT. Shipping: https://opendrone.be/en/shipping
- Warranty and returns: https://opendrone.be/en/warranty and https://opendrone.be/en/herroepingsrecht

## How to order

Orders go through the Shopify checkout from the product page, in the
visitor's own browser session. Shopping agents must not attempt orders: send
the human to the product page on this site to press the buy button there. A
machine-readable feed lives at https://opendrone.be/products.json.

## Catalog

Prices EUR incl. VAT, subject to change - verify on the product page.

- [Battery strap, 15 x 200 mm, woven logo](https://opendrone.be/products/battery-strap-15-x-200-mm-woven-logo)
  - Battery strap, 15 x 200 mm, woven logo (SKU ACC-STRAP-15X200) - €2.00 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [Battery strap, 20 x 220 mm, woven logo](https://opendrone.be/products/battery-strap)
  - Battery strap, 20 x 220 mm, woven logo (SKU ACC-STRAP-20X220) - €2.00 - pre-order, ships early November 2026 for EU delivery addresses; outside the EU, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [Capacitor, 470 µF 35V low-ESR](https://opendrone.be/products/capacitor-470uf-35v-low-esr)
  - Capacitor, 470 µF 35V low-ESR (SKU ACC-CAP-470UF-35V) - €1.00 - pre-order, ships early November 2026 for EU delivery addresses; outside the EU, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [Capacitor, 470 µF 50V low-ESR](https://opendrone.be/products/capacitor-470uf-50v-low-esr)
  - Capacitor, 470 µF 50V low-ESR (SKU ACC-CAP-470UF-50V) - €1.50 - pre-order, ships early November 2026 for EU delivery addresses; outside the EU, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [ELRS 2.4 GHz Antenna](https://opendrone.be/products/elrs-antenna-24)
  - ELRS 2.4 GHz Antenna T-style (SKU ACC-ANT-T) - €4.50 - pre-order, ships early November 2026 for EU delivery addresses; outside the EU, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [ELRS 868/915 MHz + 2.4 GHz U.FL T-style antenna](https://opendrone.be/products/elrs-868-915-mhz-2-4-ghz-u-fl-t-style-antenna)
  - ELRS 868/915 MHz + 2.4 GHz U.FL T-style antenna (SKU ACC-ANT-DUAL-T) - €6.00 - pre-order, ships early November 2026 for EU delivery addresses; outside the EU, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [Gemfan 3020-3 propeller set, 3 inch T-mount](https://opendrone.be/products/gemfan-3020-3-propeller-set-3-inch-t-mount)
  - Gemfan 3020-3 propeller set, 3 inch T-mount (SKU ACC-PROP-3-GF-3020) - €2.50 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [Gemfan Hurricane 51466 V2 propeller set, 5 inch](https://opendrone.be/products/gemfan-hurricane-51466-v2-propeller-set-5-inch)
  - Gemfan Hurricane 51466 V2 propeller set, 5 inch (SKU ACC-PROP-5-GF-51466) - €3.90 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [HQProp 5x4.3x3 V2S propeller set, 5 inch](https://opendrone.be/products/hqprop-5x4-3x3-v2s-propeller-set-5-inch)
  - HQProp 5x4.3x3 V2S propeller set, 5 inch (SKU ACC-PROP-5-HQ-5X43X3-V2S) - €2.90 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [HQProp Durable T3x2x3 propeller set, 3 inch T-mount](https://opendrone.be/products/hqprop-durable-t3x2x3-propeller-set-3-inch-t-mount)
  - HQProp Durable T3x2x3 propeller set, 3 inch T-mount (SKU ACC-PROP-3-HQ-T3X2X3-DUR) - €2.50 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [HQProp Juicy J37 propeller set, 5 inch](https://opendrone.be/products/hqprop-juicy-j37-propeller-set-5-inch)
  - HQProp Juicy J37 propeller set, 5 inch (SKU ACC-PROP-5-HQ-J37) - €3.90 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [HQProp T3x3x3 propeller set, 3 inch T-mount](https://opendrone.be/products/hqprop-t3x3x3-propeller-set-3-inch-t-mount)
  - HQProp T3x3x3 propeller set, 3 inch T-mount (SKU ACC-PROP-3-HQ-T3X3X3) - €2.50 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [OpenESC](https://opendrone.be/products/openesc)
  Design source: https://github.com/OpenDrone-hw/OpenESC-20x20
  - OpenESC 20×20 (SKU OPENESC-2020) - €44.10 - pre-order, ships early November 2026 for EU delivery addresses; outside the EU, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenESC 30×30 (SKU OPENESC-3030) - €53.10 - pre-order, ships early November 2026 for EU delivery addresses; outside the EU, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [OpenFC Lite](https://opendrone.be/products/openfc-lite)
  Design source: https://github.com/OpenDrone-hw/OpenFC-Lite
  - OpenFC Lite 20×20 (SKU OPENFC-LITE-2020) - €26.10 - pre-order, ships early November 2026 for EU delivery addresses; outside the EU, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFC Lite 30×30 (SKU OPENFC-LITE-3030) - €35.10 - pre-order, ships early November 2026 for EU delivery addresses; outside the EU, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [OpenFrame](https://opendrone.be/products/openframe)
  Design source: https://github.com/OpenDrone-hw/OpenFrame-5F
  - OpenFrame 5" Freestyle (SKU OPENFRAME-5) - €44.10 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame 3" Freestyle (SKU OPENFRAME-3) - €35.10 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [OpenFrame spare parts](https://opendrone.be/products/openframe-spares)
  - OpenFrame spare parts Arm / 3" (SKU ACC-FRM-ARM-3) - €4.00 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Arm / 5" (SKU ACC-FRM-ARM-5) - €6.00 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Top plate / 3" (SKU ACC-FRM-TOP-3) - €4.50 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Top plate / 5" (SKU ACC-FRM-TOP-5) - €6.50 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Middle plate / 3" (SKU ACC-FRM-MID-3) - €5.00 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Middle plate / 5" (SKU ACC-FRM-MID-5) - €6.00 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Bottom plate / 3" (SKU ACC-FRM-BOT-3) - €5.50 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Bottom plate / 5" (SKU ACC-FRM-BOT-5) - €7.00 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Cross / 3" (SKU ACC-FRM-CROSS-3) - €3.00 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Cross / 5" (SKU ACC-FRM-CROSS-5) - €3.00 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Camera mount pair / 3" (SKU ACC-FRM-CAM-3) - €4.00 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Camera mount pair / 5" (SKU ACC-FRM-CAM-5) - €4.00 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Hardware kit / 3" (SKU ACC-FRM-HW-3) - €5.00 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Hardware kit / 5" (SKU ACC-FRM-HW-5) - €5.00 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenFrame spare parts Battery pad / 3" and 5" (SKU ACC-FRM-PAD) - €1.50 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [OpenMotor](https://opendrone.be/products/openmotor): Brushless motors for OpenFrame 3" and 5", each wound for 4S or 6S. Sold per motor, 4 per quad. OEM motors, not open hardware.
  Resold OEM part, not open hardware
  - OpenMotor 1604 / 6S (SKU OPENMOTOR-1604) - €17.10 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenMotor 2306 / 6S (SKU OPENMOTOR-2306) - €21.60 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenMotor 1604 / 4S (SKU OPENMOTOR-1604-4S) - €15.20 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenMotor 2306 / 4S (SKU OPENMOTOR-2306-4S) - €19.20 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
- [OpenRX](https://opendrone.be/products/openrx): It picks up the commands from your radio and passes them to the flight controller. All four versions work with a radio that has 2.4 GHz ExpressLRS. Not sure whi
  Design source: https://github.com/OpenDrone-hw/OpenRX-Lite
  - OpenRX Lite (SKU OPENRX-LITE) - €16.80 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenRX Lite-UFL (SKU OPENRX-LITE-UFL) - €18.90 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenRX Mono (SKU OPENRX-MONO) - €24.30 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents
  - OpenRX Gemini (SKU OPENRX-GEMINI) - €28.80 - pre-order, ships by 31 March 2027 if the target is reached by 15 December 2026, otherwise you choose a refund or to wait - ordering is not available to agents

## Design sources

Every board is buildable from source (CERN-OHL-S v2). Per-product repos are
listed in the catalog above; the full set lives at
https://github.com/OpenDrone-hw. Boards are OSHWA self-certified (BE000026–BE000033).
Every product page links the firmware project its board runs and that project's donation page.

## Product status

Every product carries exactly one status flag: launched (buyable, design
settled), beta (buyable first batch, design may still change between
batches), alpha (coming soon, testing inside the project), in-progress
(first design exists, nothing tested), planned (no design yet). The flag
is the only status carrier: it is set as a status-* topic on the product's
GitHub repo and shown live on [the roadmap](https://opendrone.be/roadmap). Do not
infer status from prose anywhere else.

## Learn more

- [Open Source model and Incutec BV, the company behind the shop](https://opendrone.be/open-source)
- [Firmware partners](https://opendrone.be/firmware-partners)
- [Product roadmap, community vote and financial goals](https://opendrone.be/roadmap)
- [How to contribute](https://github.com/OpenDrone-hw/.github/blob/main/CONTRIBUTING.md)
- [Release timeline, everything that has shipped](https://opendrone.be/timeline)
- [Where the boards are made](https://opendrone.be/production)
- [All products](https://opendrone.be/products)
- [Newsletter / release notes](https://opendrone.be/newsletter)

## Support

- [Support tickets](https://opendrone.be/support) - open a ticket; the team answers on the ticket page
- [Find a ticket](https://opendrone.be/support/find) - with the email and the order or ticket number
- [Discord](https://discord.gg/v3sWmTcx3R) - community help
- Sales and trade: [trade enquiries](https://opendrone.be/wholesale), contact@opendrone.be

## ChatFPV (AI assistant)

ChatFPV is Incutec's AI assistant for FPV and OpenDrone hardware questions,
on two surfaces:

- https://opendrone.be/support ("Ask ChatFPV"): Your question goes to ChatFPV, Incutec's AI assistant. We remove emails, phone numbers, card numbers, IBANs and similar identifiers before sending it, but not your name or order number, so please leave those out yourself. Conversations that do not become a ticket are deleted after 90 days idle.
- The widget on product and preorder pages: Your question and the product on this page go straight to ChatFPV, Incutec's AI assistant, exactly as you type it: please do not include your name, email, phone or order number. Conversations that do not become a ticket are deleted after 90 days idle.

ChatFPV never has write access to orders, tickets or the Shopify catalog;
order, refund, return and warranty questions are always routed to a human
ticket.